PORSCHE 997 SEAT BELT BRACKET
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!
This extension is meant for use with racing shell style seats or the original rennsport style seats. One extension per side is needed for original seat belts. Two extensions per side are needed for 4 / 5 or 6-point harness. Sold individually.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
From $42.90
Make a selection
The harness mount bar has been tested and certified by an independent lab to handle the types of forces required by the national highway traffic safety admin. Dot and sae j385 rev. Mar 95, motor vehicle seat belt anchorages-performance requirements.
The harness mount bar properly locates and supports racing shoulder harnesses relative to the driver. In the case of an accident, it helps protect the driver's shoulders and spine. The harness guides also prevent excessive shifting and fatigue of the driver during the high g loads of cornering and braking.
Our bars are easy to install and remove, use only existing holes and mounting points, and will not damage the car in any way.
Strength requirements for ...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11 911 TURBO/GT2 2007-09 911 2009-12 911 2005-08 911 GT3 2003-05 911 TURBO/GT2 2001-05 911 1998-05
These brackets have been specially designed to allow you to install both, factory seat belts and aftermarket harnesses at the same time. Intended for the use of quick disconnect lap belts on both sides of the seat. This is a perfect set up for your street/track car. All brackets are designed to attach to the factory seat belt mounting locations so no drilling is required.
Note: product is sold individually.
General Fitment 911 1965-69 356 1960-65 912 1965-69 911 1970-73 911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89 911 1989-94 911 1994-98 911 1998-05 911 TURBO/GT2 2001-05 911 GT3 2003-05 911 2005-08 911 GT3 2007-11 944 1989-91 944 1985-88 944 1982-85 928 1992-95 928 1987-91 928 1983-86 928 1978-82 924 1986-88 924 1980-85 924 1976-79 914 1970-76 CAYMAN 2006-08 BOXSTER 2005-08 BOXSTER 1997-04 968 1992-95
Porsche GT3 cup cars come with schroth belts direct from the factory. If you need to replace these belts due to an accident, or if you’re putting the factory GT3 seat setup into another car, you will want to use these belts.
They are specific because of the lap belt attachment. They have a sewn-in bracket that fits perfectly on the factory mount. Standard belts require additional fabrication and a spacer to make them work. These are a bolt-in replacement which makes it much easier. The sub-straps have no adjusters to fit correctly in the vehicle, and the shoulder belts are shorter to reach the works cages with minimal excess.
General Fitment 911 GT3 2007-11 911 TURBO/GT2 2007-09 911 GT3 2003-05 911 TURBO/GT2 2001-05
These brackets have been specially designed to allow you to install both, factory seat belts and aftermarket harnesses at the same time. Intended for the use of quick disconnect lap belts on both sides of the seat. This is a perfect set up for your street/track car. All brackets are designed to attach to the factory seat belt mounting locations so no drilling is required.
Note: product is sold individually.
General Fitment 911 1965-69 356 1960-65 912 1965-69 911 1970-73 911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89 911 1989-94 911 1994-98 911 1998-05 911 TURBO/GT2 2001-05 911 GT3 2003-05 911 2005-08 911 GT3 2007-11 944 1989-91 944 1985-88 944 1982-85 928 1992-95 928 1987-91 928 1983-86 928 1978-82 924 1986-88 924 1980-85 924 1976-79 914 1970-76 CAYMAN 2006-08 BOXSTER 2005-08 BOXSTER 1997-04 968 1992-95
These brackets have been specially designed to allow you to install both, factory seat belts and aftermarket harnesses at the same time. Intended for the use of quick disconnect lap belts on both sides of the seat. This is a perfect set up for your street/track car. All brackets are designed to attach to the factory seat belt mounting locations so no drilling is required.
Note: product is sold individually.
General Fitment 911 1965-69 356 1960-65 912 1965-69 911 1970-73 911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89 911 1989-94 911 1994-98 911 1998-05 911 TURBO/GT2 2001-05 911 GT3 2003-05 911 2005-08 911 GT3 2007-11 944 1989-91 944 1985-88 944 1982-85 928 1992-95 928 1987-91 928 1983-86 928 1978-82 924 1986-88 924 1980-85 924 1976-79 914 1970-76 CAYMAN 2006-08 BOXSTER 2005-08 BOXSTER 1997-04 968 1992-95
If you have the optional sport bucket seats and planning to install 6-point race harnesses, then you will need this bracket. Without any modifications, this bracket bolts directly to the seat and keeps the harnesses at the proper 10-20° angle regardless of the seat position.
Features
• provides mounting location for sub-belts at the proper 10-20° angle regardless of the seat position
• precision cnc laser cut and bent from one piece high carbon steel for superior strength
• stylish design with laser cut bbi logo and durable satin black powdercoat finish
• attaches to seat assembly using factory mounting points with all hardware included
• compatible with Porsche 991 GT3 and 981 Cayman GT4...(choose a part on the right to read more)
Schroth racing Porsche GT3 standard black belt Porsche 911 GT3 99+
Porsche GT3 cup cars come with schroth belts direct from the factory. If you need to replace them because of an accident, or if youre putting the factory GT3 seat setup into another car, youll want these belts.
They are specific because of the lap belt attachment. They have a sewn-in bracket that fits perfectly on the factory mount. Standard elts require additional fabrication and a spacer to make them work. These are a bolt-in replacement - much easier. The sub-straps have no adjusters to fit correctly in the vehicle, and the shoulder belts are shorter to reach the works cages with minimal excess.
They are available with stand...(choose a part on the right to read more)
General Fitment 911 1998-05
Halguard™ is no ordinary automotive fire extinguisher. It contains halotron 1®, electrically nonconductive "clean" extinguishing agent that rapidly turns into a gas. Halotron 1® has passed extensive testing by underwriters laboratories, and meets faa requirements. It can be found on commercial aircraft, and is used by airport fire fighters and on the flight line. Whatever your passion, protect your investment with a fire extinguisher that attacks fires involving flammable liquids quickly and safely, with no danger of electric shock, and without leaving a damaging residue to clean up. Comes with a 2-strap mounting bracket for installation in your vehicle. For a practical, custom mounting solution, please s...(choose a part on the right to read more)
General Fitment ACCESSORY
Halguard™ is no ordinary automotive fire extinguisher. It contains halotron 1®, electrically non-conductive "clean" extinguishing agent that rapidly turns into a gas. Halotron 1® has passed extensive testing by underwriters laboratories, and meets faa requirements. It can be found on commercial aircraft, and is used by airport fire fighters and on the flight line. Whatever your passion, protect your investment with a fire extinguisher that attacks fires involving flammable liquids quickly and safely, with no danger of electric shock, and without leaving a damaging residue to clean up. Comes with a 2-strap mounting bracket for installation in your vehicle. For a practical, custom mounting solution, please ...(choose a part on the right to read more)
General Fitment ACCESSORY
Brey-krause?s new Cayman harness truss is a unique mounting system that helps to position
The driver using fi xed attachment locations for harness straps. The unit is made of aluminum and
Stainless steel for superior strength and support, yet it is lighter than tubular or steel bars. It has
Been tested and certifi ed to meet nhtsa load requirements. The r-1045 is easy to install and
Remove, utilizing existing factory mounting points.
? Constructed of 6061-t6 aluminum with stainless steel end brackets
? The lattice is precision water-jet machined, and all aluminum components are fi nished with
A clear anodize
? Tested and certifi ed to handle the types of forces required by the national highway traffi c
...(choose a part on the right to read more)
General Fitment CAYMAN 2006-08
Halguard™ is no ordinary automotive fire extinguisher. It contains halotron 1®, electrically non-conductive "clean" extinguishing agent that rapidly turns into a gas. Halotron 1® has passed extensive testing by underwriters laboratories, and meets faa requirements. It can be found on commercial aircraft, and is used by airport fire fighters and on the flight line. Whatever your passion, protect your investment with a fire extinguisher that attacks fires involving flammable liquids quickly and safely, with no danger of electric shock, and without leaving a damaging residue to clean up. Comes with a 2-strap mounting bracket for installation in your vehicle. For a practical, custom mounting solution, please ...(choose a part on the right to read more)
General Fitment ACCESSORY
Schroth racing Porsche GT3 hans black belt Porsche 911 GT3 99+
Porsche GT3 cup cars come with schroth belts direct from the factory. If you need to replace them because of an accident, or if youre putting the factory GT3 seat setup into another car, youll want these belts.
They are specific because of the lap belt attachment. They have a sewn-in bracket that fits perfectly on the factory mount. Standard elts require additional fabrication and a spacer to make them work. These are a bolt-in replacement - much easier. The sub-straps have no adjusters to fit correctly in the vehicle, and the shoulder belts are shorter to reach the works cages with minimal excess.
They are available with standard ...(choose a part on the right to read more)
General Fitment 911 1998-05
Schroth racing Porsche GT3 standard silver belt Porsche 911 GT3 99+
Porsche GT3 cup cars come with schroth belts direct from the factory. If you need to replace them because of an accident, or if youre putting the factory GT3 seat setup into another car, youll want these belts.
They are specific because of the lap belt attachment. They have a sewn-in bracket that fits perfectly on the factory mount. Standard elts require additional fabrication and a spacer to make them work. These are a bolt-in replacement - much easier. The sub-straps have no adjusters to fit correctly in the vehicle, and the shoulder belts are shorter to reach the works cages with minimal excess.
They are available with stan...(choose a part on the right to read more)
General Fitment 911 1998-05
Schroth racing Porsche GT3 hans blue belt Porsche 911 GT3 99+
Porsche GT3 cup cars come with schroth belts direct from the factory. If you need to replace them because of an accident, or if youre putting the factory GT3 seat setup into another car, youll want these belts.
They are specific because of the lap belt attachment. They have a sewn-in bracket that fits perfectly on the factory mount. Standard elts require additional fabrication and a spacer to make them work. These are a bolt-in replacement - much easier. The sub-straps have no adjusters to fit correctly in the vehicle, and the shoulder belts are shorter to reach the works cages with minimal excess.
They are available with standard 3...(choose a part on the right to read more)
General Fitment 911 1998-05
Schroth racing Porsche GT3 standard red belt Porsche 911 GT3 99+
Porsche GT3 cup cars come with schroth belts direct from the factory. If you need to replace them because of an accident, or if youre putting the factory GT3 seat setup into another car, youll want these belts.
They are specific because of the lap belt attachment. They have a sewn-in bracket that fits perfectly on the factory mount. Standard elts require additional fabrication and a spacer to make them work. These are a bolt-in replacement - much easier. The sub-straps have no adjusters to fit correctly in the vehicle, and the shoulder belts are shorter to reach the works cages with minimal excess.
They are available with standar...(choose a part on the right to read more)
General Fitment 911 1998-05
Schroth racing Porsche GT3 standard blue belt Porsche 911 GT3 99+
Porsche GT3 cup cars come with schroth belts direct from the factory. If you need to replace them because of an accident, or if youre putting the factory GT3 seat setup into another car, youll want these belts.
They are specific because of the lap belt attachment. They have a sewn-in bracket that fits perfectly on the factory mount. Standard elts require additional fabrication and a spacer to make them work. These are a bolt-in replacement - much easier. The sub-straps have no adjusters to fit correctly in the vehicle, and the shoulder belts are shorter to reach the works cages with minimal excess.
They are available with standa...(choose a part on the right to read more)
General Fitment 911 1998-05
Schroth racing Porsche GT3 hans red belt Porsche 911 GT3 99+
Porsche GT3 cup cars come with schroth belts direct from the factory. If you need to replace them because of an accident, or if youre putting the factory GT3 seat setup into another car, youll want these belts.
They are specific because of the lap belt attachment. They have a sewn-in bracket that fits perfectly on the factory mount. Standard elts require additional fabrication and a spacer to make them work. These are a bolt-in replacement - much easier. The sub-straps have no adjusters to fit correctly in the vehicle, and the shoulder belts are shorter to reach the works cages with minimal excess.
They are available with standard 3...(choose a part on the right to read more)
General Fitment 911 1998-05
Material: 11 gauge, type 304, stainless steel.
Finish: powdercoated in durable black wrinkle-finish.
Weight: 4 lbs.
Models: model 846 r9080 secures Porsche model GT3 seats to floor on driver's side. Model 846 r9081 secures Porsche mode GT3 seats to floor on passenger's side.
Installation: adapts GT3 seats to 996/997/Boxster for direct floor mount with 846 r9042.
Miscellaneous: allows taller drivers to floor mount seats for meeting their clearance requirements. May be mounted in three positions with two inches of total adjustability forward - back. 846 r9042 adapter is required for installation. 846 r908x series seat mount kits provide an inboard seat belt mount. 846 r9031 optional anti-sub strap mount fo...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11 911 TURBO/GT2 2007-09 911 2005-08 911 1998-05 CAYMAN 2006-08 BOXSTER 2005-08 BOXSTER 1997-04
Material: 11 gauge, type 304, stainless steel.
Finish: powdercoated in durable black wrinkle-finish.
Weight: 4 lbs.
Models: model 846 r9080 secures Porsche model GT3 seats to floor on driver's side. Model 846 r9081 secures Porsche mode GT3 seats to floor on passenger's side.
Installation: adapts GT3 seats to 996/997/Boxster for direct floor mount with 846 r9042.
Miscellaneous: allows taller drivers to floor mount seats for meeting their clearance requirements. May be mounted in three positions with two inches of total adjustability forward - back. 846 r9042 adapter is required for installation. 846 r908x series seat mount kits provide an inboard seat belt mount. 846 r9031 optional anti-sub strap mount fo...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11 911 TURBO/GT2 2007-09 911 2005-08 911 1998-05 CAYMAN 2006-08 BOXSTER 2005-08 BOXSTER 1997-04
- material: 11 gauge, type 304, stainless steel.
- finish: powder coated in durable black wrinkle-finish.
- weight 4.5 lbs.
- models: model 846-r9755 recaro spg/spa seats for left side. Use 846-r9756 for right side.
- installation: adapts recaro spg/spa seats (including pro racer hans models) to 996/986 OEM manual sliders & OEM GT3 sliders or bk's 846 r9044 fixed floor mount assembly.
Miscellaneous: 846-r9755 provides an inboard seat belt mount.
Fits: GT3 rsr (04-), GT3 r/rs (99-03), GT3-cup (98-04), GT3 rs (04-), GT3 04-05 (04-05), GT3 99-01 (99-01), GT2 (01-05), turbo (01-05), c4s 3.6 (02-05), c4 3.6 (02-05), c2 3.6 (02-05), c4 3.4 (99-01), c2 3.4 (98-01), 3.2 03 - (03-04), 3.2 -02 (00-02), 2.7 03...(choose a part on the right to read more)
General Fitment 911 GT3 2003-05 911 TURBO/GT2 2001-05 911 1998-05 BOXSTER 1997-04
Will work with recaro sport seats and 996 GT3 seats only. Does not work with OEM GT3 clubsport seats and OEM GT2 seats. Please use part # 846 r9032 & 846 r9034 for that application.
Fits: GT3 rsr, 3.8l, 342kw (07-10), GT3 cup s (08-09), GT3 cup 3.6l (05-07), GT3 rs, 331kw (10-), GT3, 320kw (10-), 3.6l, 305kw (07-09), GT2 (08-09), turbo (07-09), Carrera 4s, 283kw (09-), Carrera 4, 254kw (09-), Carrera s, Carrera, 261kw (05-08), 239kw (05-08), GT3 r/rs (99-03), GT3-cup (98-04), GT3 04-05 (04-05), GT3 99-01 (99-01), GT2 (01-05), turbo (01-05), c4s 3.6 (02-05), c4 3.6 (02-05), c2 3.6 (02-05), c4 3.4 (99-01), c2 3.4 (98-01), 3.4l, 235 kw (09-), 2.9l, 195 kw (09-), s 3.4, 217 kw (06-08), 2.7, 180 kw (07-08), 228 k...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11 911 TURBO/GT2 2007-09 911 2009-12 911 2005-08 911 GT3 2003-05 911 TURBO/GT2 2001-05 911 1998-05 CAYMAN 2009-12 CAYMAN 2006-08 BOXSTER 2009-11 BOXSTER 2005-08 BOXSTER 1997-04
For modell 997,987,987c you must order belt support
721115312
For recaro "speed" and "sport" seats
Fits: GT3 rs, 4l, 368kw (11-), 3.8l, 331kw (10-), GT3, 320kw (10-), 3.6l, 305kw (07-09), GT2 rs, 456kw (11-), turbo s, 390kw (11-), turbo, 368kw (10-), turbo (07-09), Carrera 4s, 283kw (09-), Carrera 4, 254kw (09-), Carrera s, Carrera, 261kw (05-08), 239kw (05-08), GT3 r/rs (99-03), GT3-cup (98-04), GT3 04-05 (04-05), GT3 99-01 (99-01), GT2 (01-05), turbo (01-05), c4s 3.6 (02-05), c4 3.6 (02-05), c2 3.6 (02-05), c4 3.4 (99-01), c2 3.4 (98-01), s 3.4, 217 kw (06-08), 2.7, 180 kw (07-08), 3.4, 217 kw (07-08), 3.2, 206 kw (05-06), 176 kw (05-06), 3.2 03 - (03-04), 3.2 -02 (00-02), 2.7 03- (03-04), 2.7 -02 (0...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11 911 TURBO/GT2 2007-09 911 2009-12 911 2005-08 911 GT3 2003-05 911 TURBO/GT2 2001-05 911 1998-05 CAYMAN 2006-08 BOXSTER 2005-08 BOXSTER 1997-04
From $427.90
Make a selection
Material: typ 304, aus rostfreiem stahl.
Oberfläche: pulverbeschichtet in schwarz
Gewicht: 4 lbs.
Modelle: modell 846r9080 ermöglicht den einbau des Porsche GT3 sitzes auf der fahrerseite. Modell 846r9081-ermöglicht den einbau des Porsche GT3 sitzes auf der beifahrerseite
Installation: für den einbau der GT3 sitze in 996/997/Boxster für direkte boden-montage wird noch zusätzlich 846r9042( adapter) benötigt.
Material: 11 gauge, type 304, stainless steel.
Finish: powdercoated in durable black wrinkle-finish.
Weight: 4 lbs.
Models: model 846r9080 secures Porsche model GT3 seats to floor on driver's side. Model 846r9081 secures Porsche mode GT3 seats to floor on passenger's side.
Installation:...(choose a part on the right to read more)
General Fitment 911 1994-98 911 1989-94 944 1982-85 944 1985-88
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|